Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 11 results ...
Ali Khan, M S, Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(01), 196-210.
Asjad, M, Kulkarni, M S and Gandhi, O P (2016) Supportability issues of mechanical systems for their useful life. Journal of Engineering, Design and Technology, 14(01), 33-53.
Chen, H-Y, Chang, Y-M and Chang, H-C (2016) A numerical definition-based systematic design approach for coupling consumers' image perception with product form. Journal of Engineering, Design and Technology, 14(01), 134-59.
Dang, C N and Le-Hoai, L (2016) Critical success factors for implementation process of design-build projects in Vietnam. Journal of Engineering, Design and Technology, 14(01), 17-32.
Georgiou, A, Haritos, G, Fowler, M and Imani, Y (2016) Advanced phase powertrain design attribute and technology value mapping. Journal of Engineering, Design and Technology, 14(01), 115-33.
Harinarain, N and Haupt, T C (2016) Mission: studio based learning in construction. The University of KwaZulu-Natal case study. Journal of Engineering, Design and Technology, 14(01), 160-81.
Rohdin, P, Dalewski, M and Moshfegh, B (2016) Combining a survey approach and energy and indoor environment auditing in historic buildings. Journal of Engineering, Design and Technology, 14(01), 182-95.
Sharifi, Y and Aviz, H (2016) Effect of outrigger-belt truss location on the dynamic response of high-rise building subjected to blast loading. Journal of Engineering, Design and Technology, 14(01), 54-77.
- Type: Journal Article
- Keywords: building technology; simulation; software engineering; design strategies; simulation modeling for construction; system engineering; blast load; tall buildings; shear core; outrigger; belt truss
- ISBN/ISSN:
- URL: https://doi.org/10.1108/JEDT-12-2013-0084
- Abstract:
Purpose – Nowadays, with the expansion of terrorist operations around the world and also the dangers of accidental explosions, the need to design structures resistant to this phenomenon for the protection and safety of its citizens is inevitable. Tall buildings are one of the most important issues because of which those behavior should be investigated against the blast loading. Design/methodology/approach – In this paper, the authors used a simple method for investigating the dynamic response of tall buildings with the combined system of framed tube, shear core and outrigger-belt truss located at different heights of the building’s that were subjected to blast loading. This proposed model is based on the development of a continuum model and the ruling equations that have been obtained using the energy principle predict the whole structure idealized as a shear and flexural cantilever beam with rotational springs at the belt truss location. Findings – The mathematical procedure shows a good understanding of the structural behavior and is suitable for a quick evaluation during the preliminary design stage, which requires less time. Moreover, it was concluded that the present blast load idealization can be used to reasonably assess the response of tall buildings subjected to blast load. Originality/value – The comparative analysis in this paper could give other engineers a simple analysis method for the preliminary analysis and design of tall building analysis. Numerical example is given to illustrate the ease of application and the accuracy of the suggested model.
Shiue, I (2016) Future urban design strategies for health and wellbeing: Proposal of DIDID action plan and design mapping. Journal of Engineering, Design and Technology, 14(01), 104-14.
Vidyadhar, R, Sudeep, K R, Vinodh, S and Antony, J (2016) Application of fuzzy logic for leanness assessment in SMEs: a case study. Journal of Engineering, Design and Technology, 14(01), 78-103.
Vinodh, S and Sharath, K T (2016) A case study on applying creative design concepts to brake rotor design. Journal of Engineering, Design and Technology, 14(01), 2-16.